Recycling has become the catch all phrase often used in place of the 3 R’s. But in its truest form recycling means taking one thing and changing it, usually chemically, into another. This is not to say that recycling is without value; it is certainly better than putting the items in the bin where they will end up in landfills and leach chemicals into our ground water. It is though to say that before you place anything in the recycle bag, first consider if you could reduce or re-use it, because everything that ends up in the recycling bag will have to be altered before it can be used again. Even then it is cleaner to produce goods from recyclables than from raw materials.
Here are just a few reasons to make certain that after you have reduced the amount of waste your create and re-used as many things as possible that your family puts as many things as possible into the recycling bins:
Recycling one aluminium can saves enough energy to run a TV for three hours — or the equivalent of a half a gallon of gasoline.
Each ton (2000 pounds) of recycled paper can save 17 trees, 380 gallons of oil, three cubic yards of landfill space, 4000 kilowatts of energy, and 7000 gallons of water. This represents a 64% energy savings, a 58% water savings, and 60 pounds less of air pollution!
The 17 trees saved (above) can absorb a total of 250 pounds of carbon dioxide from the air each year. Burning that same ton of paper would create 1500 pounds of carbon dioxide.
Recycling plastic saves twice as much energy as burning it in an incinerator.
The energy saved from recycling one glass bottle can run a 100-watt light bulb for four hours. It also causes 20% less air pollution and 50% less water pollution than when a new bottle is made from raw materials.
A modern glass bottle would take 4000 years or more to decompose — and even longer if it’s in the landfill.
Today is the actually a great day to talk about recycling. Each Thursday the council sends around men to collect our recyclables. The council gives us re-usable sacks, which we can use to collect all paper, cardboard, tin cans, aluminium, glass bottles and jars and plastic bottles. Unfortunately, they do not over recycling for other plastics. As I have been writing this series of blogs that has been one thing that I have been especially mindful of: how much plastic packaging manufacturers use that cannot be recycled and that it is estimated takes over 500 years to decompose in landfills.
But it is not just our plastics, glass, metals and paper that we recycle. Thanks to a wonderful programme through the Islington council, last year we were able to purchase a subsidized wormery to recycle our food waste into compost and liquid fertilizer for growing my own food. Actually, even though we may think that food thrown into the bin will degrade relatively quickly in the landfills, the biggest problem is the amount of methane, a dangerous green house gas, which it produces in that time. Methane is twenty times more potent than carbon dioxide and a major contribute to climate change. While my wormery cannot accommodate meat products I put all peels and unused fruits and vegetables into it. I should soon be harvesting my first patch of compost…just in time for my summer garden.
So how does my family do on recycling? Not too bad honestly. This week we had two bags of recyables and will only have two half full 13 gallon bin bags of other rubbish. Actually hubby and I got into a minor disagreement over the trash last night. One of the first rules of the 3R’s is to only throw out your garbage when the bag is full. In our case though, it had begun to smell. I am still looking for a solution…if anyone has ideas they would be greatly appreciated. But for a family of three adults and one pre-schoolers two large bags of recycling and one full 13 gallon bin bag in a week is pretty good I think. I imagine that there are single people, who put more than one bag in the bin each week.
Terri O’Neale is the mother of six; ranging in age from 3 to 22. She has been both a working and stay-at-home mother at various times in her life. She was also a single mother for almost five years, before re-marrying the love of her life at the age of forty. Obviously, she has a life-time of training in raising a family on a tight budget. In addition to these real life experiences, she possesses a bachelors degree in health education and a minored in environmental management in her masters programme.
Terri feels strongly that this is one of the most challenging times in history for the family, but she also believes that families with the will and resolve to address the pressing issues of saving money, becoming greener, leading healthier lifestyles and spending more time with one another can endure these challenging times and come out victorious in the end.
Through Frugal Family articles, blogs, videos and social networking, she helps modern families rediscover some lost art forms such as cooking, sewing, and gardening. The goal is not to go back in time or become fanatical, but to help all families find simple and effective ways that fit into their lifestyle to make moderate changes with huge impacts. For more information, check out her blog http://frugalfam.wordpress.com/.
NEW PALTZ â?? The military has increasingly been tapping into alternative sources of energy as part of its energy independence and security strategies, an approach which could provide new opportunities for the region’s solar energy …
What is a solar panel? A device that reflects the sun’s; A device that turns the sun’s rays into water; A device that turns water into electricity; A device that harnesses solar energy and transforms it to electricity. …
Changshu industrial scale use of solar thermal technology breakthroughs, by Jiangsu New Solar Energy Co., Ltd. Hanshin bear design and construction of the world’s largest “solar energy and comprehensive utilization of circular economy,” …
In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.
Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.
Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.
It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.
Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.
The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.
Benefits of Solar Energy Solar energy refers to a clean type of energy that is harnessed from the rays of the sun. This natural energy source is popularly used.
As we all know, a solar panel is a device that can be used to collect solar energy from the sun which can then be converted into electricity with investors. This electricity can be used to produce energy for your home. The size of solar …
KINGSTON â?? The head of The Solar Energy Consortium says the Mid-Hudson Valley can become a hub of solar energy manufacturing despite recent setbacks, and he called on locals to keep faith in the effort. Speaking at a breakfast meeting …
Independent solar company Nautilus Solar Energy has acquired two distributed generation projects in Florida, US and also plans to develop a third Greenfield utility-scale project in the state. Construction of the Green Cove 131kW solar …
The Environmental Plenty Compared With Those Who Are Tested in the Sore Barren Arid Desert
Life has so many contradictions. It was a privilege and joy to take a colleague friend, who had very little of this world’s goods, to the local supermarket in Kenya and encourage him to buy whatever he and his family required along with a little treat for his children. To be able to pay at the checkout desk was an honour.
He and his family lived in a food desert. They had maize and rice but not much more. Margarine and sugar and one or two other products would make their life a little better for a little while.
Jesus Christ, Who was King of Kings and Lord of Lords, lived in the desert praying and fasting for forty days. Having been there at the north end of the Dead Sea it is stoney, hot, barren, and dry. Reading the account of what happened in the early Chapters of Matthew or Luke can challenge our crazy consumption lifestyles.
To show concern and care for our environment may involve fasting from various habits and foods we have become used to and have taken for granted. The sin element has to be dealt with, and sin is a word from which people shy away in these present times, but most of the suffering is the direct consequence of sin, and there can be no hiding from that fact.
When you see children who should be at school having to walk miles daily to fetch water can make me angry! All we have to do in ‘the west’ is turn on the tap and there we have clean clear water. When we flush the toilet the efficient sewerage system does the rest.
But, in Kenya, and in many other nations, the lack of fresh water and the total absence of sewerage is the cause of so many serious illnesses and diseases. Much of this could be rectified within a few months if the leaders of the nations were genuinely concerned and interested.
There are no quick solutions to remedy the massive issues facing those who are truly poor, but there are solutions which could start to become operational by a different type of leadership, where corruption could be by-passed. People working and serving in the Aid Agencies are normally in this fight against poverty for years and they realise that it is a long haul, where change comes slowly.
I have just thought of a phrase. I am out to change the world by seeing one person at a time converted to Jesus Christ. Visiting some of the projects in Kenya and Uganda is proof of what just can be done, but oh how they need a little more financial resources.
To provide water for people by piping it through filters can make such a massive difference to households and families and entire communities.
If only Governments would make this a priority, but that would depend upon radical leadership which might shake supporters but would certainly benefit those in need.
Are there leaders out there who would be willing to take such a political risk? The rewards would be enormous and surprising, as the blessing of Almighty God would fall upon these leaders and nations.
Many can chase wealth and power, rather than humility, service and selflessness.
The consequences of greed and corruption cause devastation in the lives of millions, and the greedy and corrupt appear to be unaware of that. Are they so blind? Remember, we all have to appear before the judgment seat of Almighty God one whether we want to or not!
O, to send farmers where we have sent fighters and water experts where we have sent warriors and sewer layers where we have sent soldiers.
The environment is more than soil and waves and icebergs. Care for the environment is demonstrated by our care for people.
Many in ‘the west’ are trapped in a wealth culture just as millions are caught in the poverty trap. Release and deliverance and freedom is possible. In which ways can we move forward and help? If there are any in leadership reading this article then the responsibility is yours and mine.
Sandy Shaw.
Sandy Shaw is Pastor of Nairn Christian Fellowship, Chaplain at Inverness Prison, and Nairn Academy, and serves on The Children’s Panel in Scotland, and has travelled extensively over these past years teaching, speaking, in America, Canada, South Africa, Australia, making 12 visits to Israel conducting Tours and Pilgrimages, and most recently in Uganda and Kenya, ministering at Pastors and Leaders Seminars, in the poor areas surrounding Kampala, Nairobi, Mombasa and Kisumu.
He broadcasts regularly on WSHO radio out of New Orleans, and writes a weekly commentary at http://www.studylight.org entitled “Word from Scotland” on various biblical themes, as well as a weekly newspaper column.
His M.A. and B.D. degrees are from The University of Edinburgh, and he continues to run and exercise regularly to maintain a level of physical fitness.
Always Rely on Professionals of Wind Turbines is Very Important Proper Installation
The most efficient and economical way of using wind power to light up your home is to install a windmill or wind turbine as they are also called. The current trend is to use green energy to supplement energy generated from fossil fuels to ensure uninterrupted supply and protection of the environment.
Wind turbines of different sizes are available for your different requirements. If you live in an area where the average wind speed ranges around 10 to 12 miles per hour, you can install a wind turbine to generate electricity throughout the year. Depending on your energy requirements, you can opt for the right sized wind turbine starting from 2Kw units to even 20 Kw units.
Choosing a wind turbine manufactured by a reputed maker is essential but your task does not end there. You should choose the right contractors for installation of the wind turbine. Proper installation of wind turbines is very essential because of the following reasons.
• Installation of a 42 feet or more structure is not a simple task. The installation must be perfect to ensure that there are no safety concerns. Even the smallest flaw in installation can have severe consequences.
• A wind turbine may look like nothing more than a fan attached to a long pole. However, it is a complex and delicate mechanism that can be damaged with careless handling and improper installation. This can render your entire investment totally waste.
• The fans of the wind turbine may seem to be revolving very slowly from ground level. However, the height and the weight of the fans combined with its velocity can cause a lot of damage if breakage or other malfunction occurs.
• It is common to make use of the land beneath a windmill for other purposes. If you ensure that the wind turbine is safely installed, you can set up structures under the wind turbine without any fear of accidents and injuries.
• Setting up a wind turbine for your home will ensure that your energy requirements are taken care of forever. However, this requires a high initial investment. Improper installation will mean that your entire investment goes waste without sufficient benefits. What is the point of sinking thousands of dollars into your windmill if it conks off within a few days and you have to spend more repairing a faulty installation?
Hence, you should always deal with professional wind turbine contractors who know what they are doing. How to identify reliable contractors from all those who claim to be the best? For starters, all professional contractors who take up such projects of green energy offer a free quote. They do not charge for a quote which helps you estimate the cost of the project. Rather, they would be more than happy to offer the quotes for free.
Another way to identify professional service providers is to take a look at the spares and materials they use. Professional wind turbine installers will never use counterfeit material to reduce cost.
They follow strict safety codes and comply with all professional standards at all times. The net result of dealing with such installers for your green energy requirements is that you are assured of the best service at all times.
Dave Morrow recommends Gary Pipia the owner of http://www.windpowerspecialist.com
He is an expert in electrical contracting as well as the installation of wind turbines for home or commercial use. Also an author in the best selling book, 30 DAY TOTAL BUSINESS MAKEOVER.
Noise and vibration control is an issue that is much more common than one might originally think. In fact, it can creep up in the most unlikely of places. A good case in point is animal lab environments. Indeed, ALN Magazine recently ran an article titled “Noise & Vibration Considerations for the Animal Lab Environment.” Therein, the publication pointed out, “In the lab animal facility setting, noise, sound, and vibration affect the life cycle, interaction, and behavior of animals.” However, because “the impact of noise, sound, and vibration is a largely undocumented factor in the research,” it’s an often overlooked issue.
“If the sound pressure levels get too high,” the article continues, “there is a negative impact on animals and structures.” Vibration control, however, is just as important to these animals as noise control in that it “is a driving force behind radiated sound.”
Obviously, exposure to noise and vibration can be detrimental to an animal’s hearing, but the risks don’t stop there. “Sound and vibration can [also] have a physical impact on animals.” Even more startling, “Smaller animals are more susceptible to the affects of sound and vibration over time and will adapt or adjust accordingly. In some cases, mutations may result from exposure to undesirable conditions.”
How can animal laboratories mitigate these problems? The magazine notes, “The designers can control items that are constant disturbances that may greatly impact the animal community. Items within the designer’s control include ventilation system design, machinery vibration isolation, wall construction, lighting selection, and computer terminal placement.”
During the design process, animal labs may want to consult with a producer of custom-molded rubber and rubber-to-metal bonded parts for noise and vibration control. A world leader in the creation of rubber molding and rubber-to-metal bonded parts can help to create an environment that is not only safe for the animals being kept there but is also conducive to a healthy work environment for the people who are employed there.
The Vibro-Insulator line of isolators and mounts, in particular, aid in the control of noise, vibration, and shock. Selecting the right type of mount for an individual animal lab’s specific applications can prove tricky, however. That’s why consultation with an expert with reputable qualifications in rubber molding and rubber-to-metal bonding can be very beneficial.
Of course, once professional advice has been obtained, browsing the Vibro-Insulator catalog allows animal labs easy navigation so they can select the correct mount for their application. Rubber Vibro-Insulators come in a variety of styles and sizes to handle most vibration isolation problems. Most of the mount styles are designed to be used in either the compression or shear direction.
Selection of the proper Vibro-Insulator for a specific application boils down to a multi-step mathematical function that an expert can calculate for the lab or into which the lab’s design team can plug the following information:
1. The maximum load that must be supported.
2. The number of mounts supporting the load.
3. The frequency of the disturbing vibration.
4. Any restrictions on the size or style of the mount based on space limitations or assembly considerations.
Carmen Fontana is a Web Services Manager for Western Reserve Internet Services. Karman Rubber is a world leader in vibration control.
Technology Environment News 12-14-07 of Dekalb Academy
Unless you have been trapped in a cave for the last seven months you are well aware of the disaster overtaking the American automobile industry. Our government is using billions of taxpayer’s dollars to prop up an industry that has been one of the leading facilitators of numerous ills in our society, which will also take billions of dollars to repair, if it is even possible to do so.
Air pollution which contributes to increased medical costs, urban sprawl, a negative balance of payments from importing oil and global warming can all be traced at least in part to our addiction to the automobile. Now that I’ve ranted about the autos effect upon our society I also greatly acknowledge that we all, myself included, greatly enjoy the mobility and freedom provided by the pernicious machine. We can’t live with ‘em and we can’t live without ‘em. What are we to do?
A lot has been written about the currently nonexistent plug-in electric car. This machine when it finally hits the market could help solve some of our problems but current pricing estimates place the car in the forty thousand dollar range. I’m sure of one thing, it won’t solve many problems if you don’t sell them and at that price I’d hedge my bets.
However, there is one personal transportation option on the market that fits into all of President Obama’s initiatives for energy self sufficiency, global warming (reduction of green house gases), health care (exercise and weight loss), environmental protection (reduction of air and water pollution), and infrastructure renewal. That option is the Electric Bicycle.
The electric bike using lithium batteries (traditional lead-acid is very environmentally harmful) can go, depending on load factors and riding habits, roughly twenty miles at twenty miles an hour on one charge. It is almost completely silent, gives off no emissions, does not use foreign oil, does not require much room to operate or park, never needs a tune up and provides exercise. It eliminates many of the drawbacks of riding a traditional bicycle for basic transportation while having few of its own. I recognize that not many of us are hardy enough to ride a bike in the rain, snow or freezing cold but that applies as well to motorcycles, motor scooters and traditional bicycles. The electric bike can get you farther, faster without arriving at your destination soaked in sweat. It can operate in many places where other motorized vehicles cannot and makes taking hills a cinch. Riding five or ten miles to work is no big deal and you can simply pedal around bottled up traffic. Usually the lightweight batteries easily detach from the bike and can be carried into your place of work or school for recharging.
Some electric bicycles offer high tech extras such as LiFePO4 batteries that are good for a thousand recharges, regenerative braking that helps recharge the battery much as a Prius does, and internal gearing to generate more torque for uphill climbs. Most electric bikes use what is referred to as a hub motor. This is not a traditional gear or belt-drive motor but is built directly into the hub of one of the wheels. This motor contains two internal rings of opposing magnets that when power is applied causes the wheel to spin. Such motors need little service and never require oil changes, spark plugs or new belts.
Electric bikes come in several of styles. There are the traditional “beach cruiser” and mountain bike styles as well as electric folding bikes, tricycles and “road bikes”. The electric folding bikes are particularly interesting. Smaller and lighter than a traditional bicycle, they easily fold up and fit into a car trunk and can be carried on a commuter or subway train with little effort. You can take the train to your stop, unfold the bike and pedal on your way. They are also useful for those who live in tight quarters and have no external place to store their ride.
For those of you that are moderately handy with tools, there are a number of electric bike kits on the market that allow you to adapt an ordinary bicycle into an electric bike. One company, Worldwide Electric Bikes, has a particularly well-designed kit that has many of the features I previously mentioned. These electric bike kits do not require a high level of mechanical ability to install. A few common hand tools, a basic understanding of how things go together and the ability to read directions is all that is required. However, if you don’t know the difference between a crescent and a hex wrench, you may wish to buy a pre-made bike or have someone install the kit for you. If you do choose to go the kit route, you can end up with a much more powerful and sophisticated bike for substantially less money than a factory built electric bike.
Electric Bicycles in all forms have long been a staple of personal transportation in Europe and Asia where there are hundreds of thousands in operation. In the United States bicycles have traditionally been dominated by the toy or recreation market or for the dedicated enthusiast. In both Europe and Asia, cycling has been a traditional means of basic transportation. I believe that this is going to be more and more the case in this country. People are avidly seeking relief from the high financial and societal cost of automobiles. The electric bicycle, while not a panacea, is definitely poised to help provide a portion of that relief.
Electric Bicycles are inexpensive to purchase, require no license or insurance, have a negligible cost of operation and are totally “green”. So, what’s not to like?
Solar energy is, by far, the most viable of all unconventional and non-polluting energy forms. The fact that other energy forms such as biofuels etc. are derivatives of solar energy catapults its status to the zenith. …
â??Federal and state incentives plus rising energy costs and decreasing budgets are driving the strong interest in solar panels as well as our brisk hiring rate,â? said Kulick. â??We have plans to double our installation crew in the first …
BrightSource Energy, Inc. provides clean, reliable and low cost solar energy for utility and industrial companies worldwide. The BrightSource Energy team combines nearly three decades of experience designing, building and operating the …
20, 2011 /PRNewswire/ — SOL Inc. announces its partnership with the Embassy of the United States of America in Panama City, to provide solar lighting systems in an effort to assist the Embassy in achieving energy efficiency goals set …
EarthDay Birthday Celebration Means Brainstorming Ideas
EARTH DAY IS A SPECIAL DAY – There is a special day each year that was established in 1970 by Gaylord Nelson to raise awareness in individuals, communities, towns, governments and countries about the state of our earth.
We have come to realize that our Blue Marble has finite resources. Once human greed and actions of indiscretion removed or destroyed our land, water, and air it would take thousands of years to repair our fragile planet, if ever.
OUR CHANGING WORLD Many had no concept of the untold repercussions upon all living organisms that would result from thinking only of how to take from the earth and not give back or preserve. We are feeling the effects in our escalating human diseases, loss of rain forests that filter our air, changing climates bringing drought, tornadoes, hurricanes, earthquakes or floods. We are observing the rapid extinction of plants and animals both on land and in our oceans.
INCREASED AWARENESS Due to the heightened awareness from past Earth Day Celebrations many have championed for preservation and replenishing our Earth. This year we hope to far surpass the original 20 million people who were involved with that first Earth Day almost 40 years ago. The need is more pressing and urgent. Our landfills are over-burdened and farm animal waste seeps into our water supplies. We scrape coal from the ground and leave eroded denuded rock. We need to find technological methods to secure nuclear waste, stop air pollution and clean up the invisible acid rain that harms every living thing.
LAWS CAN BE ENACTED Countries around the world have created governmental committees and agencies to spearhead environmental clean up and to oversee improved management of natural resources. We should legislate for better programs and ways to protect our earth. The spirit of the day includes binding people together by simply stating the cause through slogans, posting them on banners in public places and using them as public service announcements.
BUILD COMMUNITY AND AWARENESS WITH MOTTOES Slogans solidify the main theme for each year’s celebration. You may want to emphasize the grand scheme of things or focus on a particular issue. There may be off-shoots from different organizations as they gather support for their favored area. One group may consider the rivers and streams where their people fish and recreate as the top priority. Others may focus on trees, natural preserves, and all aspects of wood and forests. People living in mountain ranges may emphasize the importance of clean air and fight to prevent acid rain. Villages that live on the coasts want to keep their fisheries alive with clean oceans.
GET INVOLVED BY BRAINSTORMING SLOGANS Suggestions for stimulating discussion, approaching the issue of slogans and having fun at the same time:
1. Meditate on the idea of Earth Day. What does your intuition tell you?
2. Look around and take notice how pollution effects you? What is the most important issue?
3. Read the paper, listen to the radio, or search the latest news online. What current event topic comes up most often?
4. Talk with friends, family, community and congregation members. Get some opinions.
5. Join an environmental group in your region and read their articles.
6. Create a survey.
7. Now that you’ve got the juices flowing, begin writing the main ideas.
8. Use as many words to describe the themes and then see if any phrases or words cover these ideas.
9. Are they catchy like the hook of a song or the repeating stanzas?
10. Would the phrase fit on a button or shirt?
11. Are the words powerful? Would they motivate others to action?
13. Are the words emotional? Do they touch the heart with meaning?
http://budurl.com/EarthDaySlogan – See a list of slogans that have been used in the past or have been proposed by others visit this Hubpage http://www.eventslisted.com/eventlaunchstrategies/ – Learn more about the Social Media aspect of EarthDay and the power of the internet and people working together towards one goal.
Please write to me if you have ideas for EarthDay Birthday Celebration Slogans.
Debby Bruck, CHOM. believes hope and healing can be accomplished through homeopathy. She sees the good in all people and prays that the people of the world will work together to repair the earth. Every little good act makes a better world.
Really? Seriously? Is it still too expensive to be green? I am a little surprised when people say that cannot do anything to be green because the products are too expensive. This may have been the case eons ago but not anymore. People now say going green is too expensive as an excuse in my opinion. Granted, I am not able to afford solar panels on my roof just yet but that does not mean I am not green or trying to be green in my own ways.
Here are some simple things that you can do now to start you off in the right direction without too much money out of pocket. Keep in mind, that while you will spend money at first, the payback is well worth it for you and the environment.
One of the first things I did to start my own green movement at home was to buy canvas bags for the grocery store. They were $1.00 each and I bought 10 of them. I always leave them in my car so no matter what store I go to I bring a bag with me. Each time I visit the grocery store I get 5 cents back for each bag that I bring.
So each week when I grocery shop I get 50 cents back. Each week that adds up quickly and before you know it, I have made my $10.00 back and am no longer a slave to the plastic bags. U.S. consumers use approximately 100 billion plastic bags annually which require an estimated 12 million barrels to produce! Just think, the majority of these bags are used just once from for less than 30 minutes and then they go into our landfills or end up in our oceans where they are a serious threat to wildlife.
The second green thing I did was change my water bottle habits. I have to admit, this one was hard for me until I did the math and it was at that moment I went to Target to buy a water filter and ordered my CamelBak Better Bottle.
The funny thing is that people are so quick to complain about the cost of gas but have you ever complained about the cost of the water bottles at the grocery store? I paid $10.00 for my bottle and $30 for my water filter and I have never once gone back to the store to buy my 12 pack of water for $6.00. And to think, a 12 pack of water bottles was finished in one week or less! I really don’t like when people say they reuse their plastic water bottles…. Do you know the bacteria that are on the bottles and the plastic leaching that occurs? Please do yourself and the environment a favor and buy a BPA Free water bottle today!
How many of us use paper napkins each day for lunch and dinner? Time to save a tree! Even napkins made from recycled materials are not as innocent as they may seem since they too wind up in landfills. A family of 4 can easily go through 84 paper napkins a week and if you think of each paper napkin costing 2 cents – well that adds up quickly over the course of a week, month, and a year. Cloth napkins can be used several times before tossing them into the laundry. With a family of four, laundry is done quite a bit so go ahead and make the switch.
Finally, do you wash all loads of laundry in cold water? Did you know that if you washed all of your clothes in cold water your clothes would last longer? Not only that, but you would save on your electrical bill. Unless you are washing baby diapers or grease stains, cold water is the way to go. 85-90 percent of the energy needed to wash your clothes in a machine is used to warm the water. Only 10-15 percent actually goes into the washer. The next time you need to buy laundry detergent, look for the detergents that are specially made for cold water.
And of course, we all know about the light bulbs and such but these were a couple other reminders of what you can do today to start saving money and you can be proud of yourself for going green! Remember, it is cool to be green!
Manila (Philippines), jan.17 : With its rapidly growing electricity demand, ample land availability and strong government commitment to sustainable economic growth, India can play a leading role in generating solar energy in the Asia …
solar energy systems will bring your electric bill way down when installed in your home. Would wonderful to not have to pay such exorbitant prices for electricity more. Initially, the cost could be high to install and it might prevent …
Iron pyrite â?? also known as fool’s gold â?? may be worthless to treasure hunters, but it could become a bonanza to the solar industry. The mineral, among the most abundant in the earth’s crust, is usually discarded by coal miners or sold …
Encouraging the rapid and responsible development of renewable energy on United States public lands is a significant part of President Barack Obama’s energy policy. An important step towards that goal was taken recently with the …
Forecasts for solar energy growth in 2011 generally noted that manufacturing capacity would increase and that margins would decrease. The outlook did not project a loss for solar energy players, but growth expectations were certainly …
What can be done about this increasingly worrying contribution to global warming?
The most important options to reduce aircraft CO2 emissions are:
Changes in aircraft and engine technology; use of alternative fuels, such as (sustainably produced) biofuels; regulatory and operational measures such as improvements in air traffic management; economic measures such as inclusion of aircraft emissions in emission trading schemes.
But, as Giovanni Bisignani, manager of International Air Transport Association (IATA), stated: “Emissions trading schemes only make sense with efficient infrastructure. The IPCC estimates that there is 12% inefficiency in air traffic management globally: we produce up to 73 million tonnes of carbon emissions each year by aircraft flying inefficiently due to air traffic management limitations”. **
On a personal level we could ask ourselves especially in the developed world: “Do we really need to fly so frequently?” The use of telework, teleconference and video conference could be largely increased to plan work and meetings. Can’t the development of land and air transportation infrastructures be balanced better according to the real needs of people and businesses? Trains could connect cities better and more cheaply for example in Europe, where the prices are not competitive with those of many flights anymore (and night train services have been reduced if not cancelled).
Life styles do matter because if millions of people want to have cheap weekends in relatively close tourist locations, many flights are needed to satisfy their desires and consequently a lot of pollution is generated. Also, our per capita emissions could be cut also by reducing the “surplus” trips, by slowing down our life rhythms and enjoying more local attractions in our free time. Who knows? We could discover the “exotic” in our own neighborhoods without flying to the Caribbean Sea…
Furthermore the relationship between the costs and the environmental externalities (i.e. costs not included in the economy like health damages caused by pollution) needs to be considered as well: there are higher marginal impacts for short-distance flights that should be considered in prices paid by passengers.
All these political, technological and personal choices are some of the good examples needed by the developing countries to follow the 21st century’s Western society along a new sustainable path which looks like the only good alternative forward.
**”Talks to reduce aircraft global-warming emissions
For further information on Climate Change please visit the Responding to Climate Change website – http://www.rtcc.org
I few weeks ago I came across an article about the deforestation situation of all the tropical rainforests. It talked about the main causes this beautiful places, origin to thousands of different life forms, are being damaged by people in so many different ways, among others: subsistence agriculture, colonization, tourism, and civilization development (savetherainforest). This latter caught my attention the most, because last week I went to my teak farm, and I got to see with my own eyes how a highway development affects our rainforest and trees so badly.
My teak farm is located about 1 hour drive from Panama City, it is located in the Colon province, home of Colon City (second biggest city in our country, Panama). Last year the government decided to build a long overdue highway connecting both cities (of course I am all for improving the quality of life of my countrymen) but I can not agree with the amount of deforestation that took place in order to build this highway.
Hundred of acres deforested in order to make way for four lanes that will bring better days to a lot of people, no doubt; but also brought a lot of disorder and chaos to a well established eco system that has being here long before us, and will continue to be here for (hopefully) thousands or millions of years after every single one of us has left this world.
Since development of cities is inevitable, specially today where commerce since to grow exponentially, cities expand rapidly, and the whole world seems to be at everybody s fingertips, we need better way of transport and communication, but could we also be more interested in both preserving and saving tropical rainforests and trees? The answer is a big OF COURSE! I would have loved to see our government promoting the planting of trees in different areas of our country in order to make up for the ones lost during the development of this highway, or during the construction of so many other infrastructures around the country. Also having more people come forward and speak up as energetic and belligerent they are about so many other problems we have on this planet. Maybe all we need are more ways to let people know about this, get them involved.
Since so much rainforest is lost every year, roughly about twice the size of the state of FLORIDA, this has become a problem for every single one of us earthlings, I think we need to get the word out, raise awareness and get people involved! Tropical Rainforest account for only 2% of land surface but through photosynthesis of trees they take massive amounts of CO2 emissions and make air clean and breathable again for every one of us. SO WE ALL NEED OUR RAINFOREST AND MORE TREES!!
24-25) organized by world-renowned solar energy (PV) think-tank Solarplaza, some of the world’s preeminent financial, PV industry and government scholars from India and around the globe will broach the subject of …
… and operation of power stations that generate renewable energy, and Q-Cells, a world leader in the photovoltaic industry, announced today that they have started building a solar energy park in southern France. …
I would like to learn about solar energy and how I can make some panels for my home, of course with in a reasonable budget. My goal is to be able to run a.
The plethora of silicon produced from these plants will be used for developing high quality silicon, which can be used in the solar panels. The energy produced from these solar power panels can be used for building next generation solar …
