You may have seen something on the news about Spokane, Washington where there is now a ban on dishwasher detergent made with phosphates. While this may seem to be an isolated case, there are actually several states (including the rest of the state of Washington) that will make dishwashing soap made with phosphates above a very small level illegal in 2010.
What is phosphate anyway and why is it used in dish washing soap? Phosphate is an inorganic chemical that is a combination of salt and phosphoric acid. Because it can clean things like hard water stains, and grease, phosphates are used in all kinds of things including dish washing soap.
Why all the fuss? Phosphate is a problem when it finds its way to freshwater rivers and lakes. The phosphate encouraged the growth of algae which depletes the oxygen in these rivers and lakes, killing off fish and other wildlife.
While there are green alternatives out there, deleting the phosphates from the dish washing soap can leave one unsatisfied with the resulting product-and a lot of dirty dishes. Plus some of these green alternatives are pricier than their cheaper phosphorous counterparts. This has caused people to travel outside their state to obtain contraband detergent from other states-which, of course, defeats the purpose of the bank in the first place.
What should you look for in a green dish washing soap? Are there green products that work as well? While there is no direct substitute for phosphorous, but there are other substances that can be used. How well they will work depends on a number of factors, perhaps the most important being the hardness of the water used for cleaning.
One ingredient that be used is a surfactants. Surfactants are usually biodegradable and are used to provide cleaning power and increase the ability of the water to separate the soil from the dish. Anionic surfactants work well as detergents, but can be less than effective in hard water. Amphoteric surfactants are used for their foaming power and can often be found with anionic surfactants. There are other substitutes for phosphates, but these can be even more dangerous than the phosphates. They include nitrilotriacatic acid (NTA) and caustic alkaline chemicals (which are particularly dangerous when ingested-as sometimes happens with children).
It may take some trial and error to come up with the phosphate substitute that works best in your water. It is unlikely that the ban on phosphates is going away, so it is better to start exploring the options now. In the meantime, the soap manufacturers continue work on the perfect phosphate substitute, but there are some excellent alternatives out there.
“Dr. Robin”, the well known MLM Radio personality is and has built his “honorary” doctorate in the Network Marketing world and has had experience in numerous other network marketing companies. He is a nationally recognized expert in the network marketing business.Dr. Robin is the current host of his radio show, “Networking with the Blindguy” with up to 4.7 million listeners daily. http://drblindguy.com
Also time to help you with going GREEN. http://gobewisenow.com DR Robin will help you with going green with products that do work and are safe.
First Step To Converting Solar Energy Using ‘Artificial Leaf’ · Border Patrol Agents To Spot Tunnels With Advanced Ground-Penetrating Radar · Study May Help Explain ‘Awakenings’ That Occur With Ambien …
The Solar Ivy is a system of thin, fluttering solar panels that can generate energy by sparkling in the sunlight. These leave can be easily integrated on the side of a building to produce energy. This concept was designed by Brooklyn …
328 solar panels are helping provide 10 per cent of power for the Auriga Leader while it is docked at the Port of Long Beach. The solar array is part of a demonstration project to reduce diesel emissions. This is the first time a ship …
For the past four years, a team of engineers has been working on an aircraft that is powered only by solar energy. After countless hours of measuring, calculating and building, their aircraft was finally ready to be unveiled to the …
They should have spent that money on solar energy since they know that solar can work here in Nigeria. It is the duty of our government to at least give to every home the energy that will serve them. If they install it and begin to …
The average solar cycle lasts for eleven years. The cycle includes a minimum of solar activity and a maximum. The sun is unusually quiet right now and has been for some time but there should be an increase in solar activity at some point in the near future.
The best current scientific estimate for the next solar maximum is 2012. If this estimate is correct, there is still a few years to try and prevent the potential of a future global disaster. A disaster that would begin on the surface of the sun and could end with tragedy on earth.
The surface of the sun is a mass of plasma that contains highly charged energy particles. Once in a while, some of these particles escape the suns surface and a mass of plasma travels through space on the solar wind. This process is known in scientific terms as a coronal mass ejection but it can also be called a solar storm.
A disaster for the planet would occur if a solar storm reaches and hits the earths magnetic shield in just the right way. If it were to happen, millions of people would lose their lives and the planet would be thrown into chaos as the technology that has become crucial to every day living suddenly gets taken away.
The perfect solar storm will start with skies that will be filled with a bright red aurora. However, soon everything will become dark as every electric bulb becomes devoid of light. The storms damage to the electric grid would be caused through an increased DC current. The runaway current would knock out and melt hundreds of key transformers within minutes, cutting off power for hundreds of millions of people.
Those damaged transformers cannot be repaired only replaced and installing a replacement takes a well-trained crew a week or more. Its incredible to consider that most major electrical utilities have just one or two suitably trained crews available for these type of transformer repairs. In addition, there are only a few spare transformers available and the rest would have to be built to order. Its a process that can take nearly twelve months.
So, the power blackout from the perfect solar storm would last for months but its not just the absence of light that would be the problem. Drinking water would still come through the taps for maybe half a day after the storm. With no electricity to pump water from reservoirs, there would be no more tap water after that.
The electric grid is necessary for almost all natural gas and fuel pipelines to operate. As a result, fuel and natural gas will quickly run out and without food delivery, supermarket shelves would soon become bare. Soon it would become necessary to control public hysteria and the military would have to be called in to restore civil order
There will be no power for heat, cooling or refrigeration until the grid is repaired and after their back up generators run out, hospitals will not be able to provide modern healthcare. A lack of water and food will result in spreading disease but Pharmaceutical companies without electricity will not be able to produce the necessary medicine.
Of course, many will say that this is absurd science fiction and it cannot happen here, but this chilling disaster scenario was outlined in a report released last January (funded by NASA) by the US National Academy of Sciences (NAS).
The fact is that a storm from the sun did hit the earths magnetic field in 1859. The effect of this solar storm on earth became known as the Carrington Event. The event was named after the amateur astronomer who observed two patches of intensely bright and white light emanating from a large group of sunspots that may have produced the event.
The solar storm that produced the Carrington Event created a red aurora across the planet from the poles to the tropics. Throughout the world, telegraph systems crashed, machines burst into flames, and electric shocks rendered operators unconscious. Compasses and other sensitive instruments reeled as if struck by a massive magnetic fist. It can happen again and the technology of the planet is now much more advanced and vulnerable.
The next solar maximum is estimated to return in about three years. A global disaster from the perfect solar storm can be prevented with proper contingency planning. There is still time for the government to be proactive and prepare to avoid disaster by creating a potential response to quickly repair the damage to the electric grid from the perfect solar storm.
James William Smith has worked in Senior management positions for some of the largest Financial Services firms in the United States for the last twenty five years. He has also provided business consulting support for insurance organizations and start up businesses. He has always been interested in writing and listening to different viewpoints on interesting topics. Visit his website at http://www.eworldvu.com or his daily blog at http://www.eworldvublog.blogspot.com
Landfill in the UK is becoming a huge problem. With the drop in the price of recycled products, the issue is what to do with all of the waste that we produce. The breakdown of waste in landfill sites creates huge amounts of the greenhouse gas methane. There are also many products that will not breakdown and will remain in the environment for ever with the potential to contaminate water supplies.
Traid, a charity specializing in the recycling of textiles reports that 900,000 tons of shoes and clothing are thrown away each year in the UK. Only 200,000 tons per year are recycled and the rest is dumped in landfill. The government estimates that similar amounts of between 550,000 and 900,000 tons of textiles are thrown away each year.
In addition to the problems of waste and landfill in the UK, there is also the consideration of the energy used and waste generated by the manufacture and distribution of clothing and textiles. Growth of cotton uses a huge amount of chemical pesticides and environmentally damaging cultivation methods. The manufacture of man made fabrics also has a huge environmental impact with. Demand for polyester the most widely used synthetic fabric has almost doubled in the last 15 years. The manufacture of polyester uses large amounts of crude oil and an energy-intensive process. It releases emissions including volatile organic compounds, particulate matter, and acid gases such as hydrogen chloride, all of which can cause health problems for workers by causing or aggravating respiratory disease.
Second hand clothing is becoming more popular as people begin to recognise the real costs of fast fashion. Consumers are becoming more aware of their buying choices and ways that they can help the environment.
Finally, there is one more great reason to recycle second hand clothing. Just because you are fed up with a piece of clothing or it does not fit you nay more, it does not mean that it has no worth. You can make sure that the worth of your second hand clothing is realized by swapping it at a swishing party on a clothes swapping website, selling it or donating it to your favorite charity.
This article was written by Ceri Heathcote for posh-swaps.com, a website for swapping, buying and selling second hand and vintage clothing.
Clothes swapping and buying and selling second hand clothes is a great way to reduce the impact of fashion on the environment and to save money.
UPDATE: The story now has links to maps showing the proposed solar energy zones. Interior Secretary Ken Salazar treks to Las Vegas to announce a plan to dedicate 670000 acres on BLM land for solar power projects. …
It is a well known fact that wind and solar electricity are possible choices way of energy. Folk understand that these two forms of energies can be made use of.
Solar Thermal Technology Yesterday, U.S. Interior Secretary Ken Salazar and Nevada Senator Harry Reid announced a series of initiatives to create a â??fast trackâ? for the development of utility scale solar energy facilities on Western …
PONTE VEDRA BEACH, Fla.–(BUSINESS WIRE)–Solar Energy Initiatives, Inc. (OTCBB:SNRY), executing on a grass roots campaign, â??RENEW THE NATIONâ?, to help redeploy a portion of the US.
In exercise of the powers conferred by entry 56 of SCHEDULE ‘A’ appended to the Maharashtra Value Added Tax Act, 2002 (Mah. IX of 2005), the Government of Mahar.
In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.
Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.
Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.
It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.
Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.
The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.